Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
Micro Force Transducer 10N 20N 50N 100N 200N Miniature Tension Compression Load Cell
Miniature Force Sensor FSSQ offers a compact design for a variety of applications. the S Beam Load Cell series provides accuracy, compact design features, and 5 capacity ranges 10N / 20N / 50N / 100N / 200N to choose from.The jr s-beam load cell FSSQ utilizes metal foil strain gauge technology to deliver 2.0mV/V output with maximum 0.2% non-linearity,the compact design enables the FSSQ to be easily embedded into machinery or test equipment – ideal for packaging machinery, assembly machinery or end-of-line test equipment.The Micro Force Transducer FSSQ features M2 threaded holes on two sides for the mounting of attachments or implements for both tension and compression force measurement in applications with limited space.
Dimensions(unit in "mm")
| Ordering code | Measurement Range | Force direction |
| FSSQ-10N | 0-10N / 0-1kgf | Tension/Compression |
| FSSQ-20N | 0-20N / 0-2kgf | |
| FSSQ--50N | 0-50N / 0-5kgf | |
| FSSQ-100N | 0-100N / 0-10kgf | |
| FSSQ-200N | 0-200N / 0-20kgf |
| Capacity | 10N / 1kg / 2.2 lbf 20N / 2kg / 4.4 lbf 50N / 5kg / 11 lb 100N / 10kg / 22 lbf 200N / 20kg / 45 lbf |
| Rated output | 2.0mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.2% R.O. |
| Hysteresis | ±0.2% R.O. |
| Nonrepeatability | ±0.1% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.03% R.O./oC |
| Temperature shift span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 352±3 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø2*3000mm 4-core shielded |
| Wiring code | Compression@ Green--Signal+ White--Signal- |
Miniature Force Transducer FSSM outputs mV signal from the full wheatstone bridge which is proportional to the applied load,a load cell amplifier can be used to convert mV signal into -5-5V / 0-10V / 4-20mA for easy signal processing,taking FSSQ-50N and FSC(-5-5V)-24V for example,the load-voltage relationship will be 0-50N compression load VS 0-5V output, 0-50N tension load VS 0-(-5V) output, 5V voltage corresponds to 50N compression load, -1V voltage corresponds to 10N tension force,and so on.
Miniature Force Transducer 10N 20N 50N 100N 200N Micro Tension Compression Load Cell