Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
Universal Compression load cell 500kg 1t 2ton 3t 5t 10t 20 ton 30ton 50 ton 100 ton
M16/M32/M40/M60 threaded Compression Load Cell FCM is made of high stiffness alloy steel based on foil strain gauge technology to deliver 2.0mV/V rated output proportional to the applied force.Pancake load cell FCM offers 0.5 ton / 1ton / 2 ton / 3ton / 5 ton / 7ton / 10 ton / 20ton / 25 ton / 30ton / 50 ton / 60ton / 100ton thirteen rated capacities to choose from. Compressive load cell FCM is suitable for both static and dynamic force measurement in tension and compression direction.Low profile structure makes it also suitable for in-line force monitoring.Pancake loadcell FCM is designed with a metric threaded hole running through the center of the transducer which can be used to mount attachments such as load buttons,eye bolts or other adapters for force loading,this makes spoke type load cells very adaptable to various cases, you may find pancake type load cell FCM applicable for force measurement in injection-molding machines, press machines and material testing equipment, weight measurement for tanks, vessels and hoppers, and so on. Custom made service is available if you need different dimensions or capacities.
Specifications
| Rated capacity | 0.5ton / 5kN / 1.1klb 1 ton / 10kN / 2.2klb 2ton / 20kN / 4.4k lb 3 ton / 30kN / 6.6 klb 5ton / 50kN / 11 klb 7 ton / 70kN / 15 klb 10ton/ 100kN / 22 klb 20 ton / 200kN / 44k lb 25ton / 250kN / 55klbf 30 ton / 300kN / 66k lb 50ton / 500kN / 110klbf 60 ton / 600kN / 132klb 100ton / 1000kN / 220klbf |
| Rated output | 2.0±10%mV/V |
| Excitation | 3-15V |
| Zero balance | ±2% of R.O. |
| Nonlinearity | ±0.05% of R.O. (≥30t ±0.1% R.O.) |
| Hysteresis | ±0.05% of R.O. (≥30t ±0.1% R.O.) |
| Nonrepeatability | ±0.05% of R.O. (≥30t ±0.1% R.O.) |
| Creep(10min) | ±0.03% of R.O. |
| Safe overload | 150% of F.S. |
| Ultimate overload | 200% of F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./10oC |
| Temperature shift span | ±0.05% R.O./10oC |
| Input resistance | 385±30 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP66 |
| Material of element | Alloy steel |
| Cable | Ø5*3000mm 4-wire |
| Wiring code | Red--Exc+ Black--Exc- Green--Sig+ White--Sig- |
A load cell sensor is a transducer that converts a load or force acting on it into electronic signal which is proportional to the load(or force) being applied.The measured load or force causes deformation of the measuring element(elastic body),the bonded strain gauge deforms accordingly which will cause the resistance change of the wheatstone bridge,under constant power supply,the output signal between Sig+ and Sig- will change proportionally,thus the load/force can be measured by measuring the output signal from the load cell.
Pancake load cell FCM outputs millivolt signal which is normally within 0-30mV,and signal amplification may be required for most applications,a load cell signal transmitter can be used to get 0-5V,0-10V or 4-20mA signal for easy data acquisition afterwards.For example: Compression load cell FCM-10t working with 0-10V amplifier,the load-output relationship will be 0-10 ton load VS 0-10V output,when you get 5V output,it means the current load is 5ton...
Weight indicator can be used to display the measured value,load cell display FPT is integrated with high accuracy 24 bit Sigma-Delta ADC,sampling speed up to 960Hz,supports RS485 or RS232 communication port,can also output 0-5V,0-10V,0-20mV or 4-20mA amplified signal.