Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
M12/M14 rod end inline load cell 20kN 10kN 5kN 3kN tension compression sensor
Inline type tension compression force transducer FLRx series are strain gauge based intended for tension and compression force measurement.The direct cable outlet from the center of the thread helps save mounting space compared to common side cable outlet,which makes in-line force load cell FLRx series suitable for force measuring applications where mounting space is tight. Besides the listed M12/M14 threaded rods,FLRx series offer a fully customized solution for our clients who prefer other thread sizes or measuring ranges.
Dimensions(in "mm")
Specifications
| Capacity | 20kN 10kN 5kN 3kN |
| Rated output | 1.0 mV/V |
| Excitation | 3-12 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% R.O. |
| Hysteresis | ±1% R.O. |
| Nonrepeatability | ±0.5% R.O. |
| Creep(5min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 385±50 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 4-core shielded |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
M12/M14 rod end inline load cell 20kN 10kN 5kN 3kN tension compression sensor