Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
Biaxial force sensor Fx/Fy 2-axis load cell two-dimensional force measurement
2-axis force sensor F2E offers 0-1kg / 0-2kg / 0-5kg / 0-10kg / 0-20kg / 0-30kg / 0-50kg / 0-100kg eight measuring ranges intended for two-dimensional force measurement in Fx/Fy directions. Each channel consists of a full wheatstone bridge to deliver mV/V output with 4-wire configuration. Both Fx and Fy direction supports tension and compression force measurement. Bi-axial load cell F2E is normally used for forct test benches, actuator force control, force simulators and other applications involve two axis force measurement. 2D sensor F2E can be modified or customized to meet requirements of different applications.
Dimensions
Ordering code
| Part No. | Capacity |
| Fx=Fy | |
| F2E-1kg | 1kgf |
| F2E-2kg | 2kgf |
| F2E-5kg | 5kgf |
| F2E-10kg | 10kgf |
| F2E-20kg | 20kgf |
| F2E-30kg | 30kgf |
| F2E-50kg | 50kgf |
| F2E-100kg | 100kgf |
Specifications
| Rated Capacity | 1kg 2kg 5kg 10kg 20kg 30kg 50kg 100kg (10N 20N 50N 100N 200N 300N 500N 1kN) |
| Rated output | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.1mV/V |
| Non-linearity | ±0.3% of rated capacity |
| Hysteresis | ±0.3% of rated capacity |
| Non-repeatability | ±0.1% of rated capacity |
| Creep(5min) | ±0.1% of rated capacity |
| Safe overload | 150% of rated capacity |
| Ultimate overload | 200% of rated capacity |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 380±30 ohms |
| Output resistance | 380±30 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP50 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm 8-core shielded cable |
| Wiring code | Fx @ Red--E+ Black--E- Green--S+ White--S- Fy @ Brown--E+ Yellow--E- Blue--S+ Gray--S- |
Bi-axial load cell 2-axis force sensor for two-dimensional force measurement