Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
Inline Force sensor 20kN 30kN 50kN 100kN 200kN compression force measurement
In line compression force transducer FLRB utilizes strain gauge technology intended for both tension and compression force measurement, tension/compression force load cell FLRB offers 0-20kN / 0-30kN / 0-50kN / 0-100kN / 0-150kN / 0-200kN six measuring ranges to choose from.M36 threaded rods located on both ends enables transducer FLRB to be easily embedded into mechanical shaft.Stainless steel construction,compact design,you may find in-line force sensor applicable for tension/compression measurement applications with limited mounting space.The standard FLRB in-line rod end load cell can be modified or customized to meet your requirements.
Dimensions(unit in "mm")
Specifications
| Capacity | 20kN 30kN 50kN 100kN 150kN 200kN |
| Rated output | 1.5 mV/V |
| Excitation | 3-12 V |
| Zero balance | ±0.05mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 700±100 ohms |
| Output resistance | 700±50 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø5*3000mm |
| Wiring code | Red--E+ Black--E- Green--S+ White--S- |
Inline Force sensor 20kN 30kN 50kN 100kN 200kN compression force measurement