Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
Rod end load cell 5kN 10kN 20kN 30kN 50kN In-line force sensor
Rod end load cell FLR is strain gauge based intended for both tension and compression force measurement, inline force sensor FLR offers 0~5kN / 0~10kN / 0~20kN / 0~30kN / 0~50kN five measuring ranges to choose from.M24 metric threaded rods located on both ends enables force transducer FLR to be easily embedded into mechanical shaft.Stainless steel construction,compact design,you may find in line force sensor applicable for tension/compression force measurement applications with limited mounting space.The standard FLR in-line load cell can be modified or customized to meet your requirements.
Dimensions(in "mm")
Specifications
| Capacity | 50kN 30kN 20kN 10kN 5kN |
| Rated output | 1.5 mV/V |
| Excitation | 3-15 V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±1% R.O. |
| Hysteresis | ±1% R.O. |
| Nonrepeatability | ±0.5% R.O. |
| Creep(5min) | ±0.2% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 385±50 ohms |
| Output resistance | 350±5 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP62 |
| Material of element | Stainless steel |
| Cable | Ø3*3000mm |
| Wiring code | Red--E+ Black--E- Green--S+ White--S- |
Rod end load cell 5kN 10kN 20kN 30kN 50kN In-line force sensor