Forsentek Co., Limited
Forsentek Co., Limited
Add to Cart
Multi axis force sensor 1kN 500N 300N 200N 100N 50N 20N multi-axis load cell
Multi axis force sensor F3G is designed to measure force in Fx/Fy/Fz at the same time,each axis is able to measure force in both tension and compression direction.Very low profile design with total 26mm height makes F3G suitable for 3-axis force measurement where mounting space is limited.Typical applications for this type of transducer are for example force exertion control in robotics, industrial test benches, grinding force control, Mechanics experiment, actuator operating force measurement and so on.
Ordering code of triaxial load cell F3G
| Ordering code | Capacity | Material | |
| Fx=Fy | Fz | ||
| F3G-20N | 20N | 20N |
Aluminum alloy |
| F3G-20-20-30 | 30N | ||
| F3G-30N | 30N | 30N | |
| F3G-30-30-50 | 50N | ||
| F3G-50N | 50N | 50N | |
| F3G-50-50-100 | 100N | ||
| F3G-100N | 100N | 100N |
Stainless steel |
| F3G-100-100-200 | 200N | ||
| F3G-200N | 200N | 200N | |
| F3G-200-200-300 | 300N | ||
| F3G-300N | 300N | 300N | |
| F3G-300-300-500 | 500N | ||
| F3G-500N | 500N | 500N | |
| F3G-500-500-1k | 1kN | ||
| F3G-1kN | 1kN | 1kN | |
Specifications
| Rated Capacity | 20N / 2kgf / 4.5lbf 30N / 3kgf / 6.7 lb 50N / 5kgf / 11 lb 100N / 10kgf / 22lb 200N / 20kgf / 45 lb 300N / 30kgf / 67 lb 500N / 50kgf / 112lb 1000N / 100kgf / 225lb |
| Sensitivity | 1.0mV/V |
| Excitation | 3-15V |
| Zero balance | ±0.05mV/V |
| Non-linearity | ±0.2% of capacity |
| Hysteresis | ±0.2% of capacity |
| Non-repeatability | ±0.1% of capacity |
| Creep(5min) | ±0.05% of capacity |
| Safe overload | 150% of capacity |
| Ultimate overload | 200% of capacity |
| Compensated temperature | 0...+40oC |
| Operating temperature | -10...+60oC |
| Temperature shift on zero | ±0.03% R.O./oC |
| Temperature shift on span | ±0.02% R.O./oC |
| Input resistance | 385±50 ohms |
| Output resistance | 350±10 ohms |
| Insulation resistance | >2000M ohms |
| Ingress protection | IP62 |
| Material of element | <100N Aluminum alloy >50N Stainless steel |
| Cable | Ø6*3000mm 12-wire shielded cable |
| Wiring code | 4-wire connection for each axis |
Multi axis force sensor 1kN 500N 300N 200N 100N 50N 20N multi-axis load cell
Dimensions(Unit in "mm)